Grease fire

jsermon

New member
Joined
May 20, 2020
Messages
3
Reaction score
0
Points
1
Location
Tennessee
was cooking bacon and had a grease fire. this is the second time. first time I let the fire burn out and everything worked fine. This time the grill is not working properly. When I turn it own I can't control the temp. It just goes to the highest regardless what I have set on the control panel.

Should I replace the control panel?
 

DaveXDm9

Moderator
Staff member
Joined
May 11, 2020
Messages
543
Reaction score
183
Points
43
Location
Tennessee
how big was the grease fire? Check to make sure that the fire did get over to the thermostat probe that goes to the controller as if the wire has melted and it could be shorting out causing the controller to malfunction.
 
  • Thread Starter Thread Starter
  • #4

jsermon

New member
Joined
May 20, 2020
Messages
3
Reaction score
0
Points
1
Location
Tennessee
Replaced temp probe and control panel. Did not fix it. Any ideas?
 

biffhero

Member
Joined
Jun 1, 2020
Messages
74
Reaction score
13
Points
8
Location
Milpitas, CA
You replaced the thermostat temperature probe and the control panel. Did the thermostat temperature probe come with a complete cable going from the control panel to the probe? It sounds like the control panel doesn't know what temperature is going on inside of the grill.
 

Latest Discussions

Top