Anyone interested in making your own smoke tubes here is what you can do.
And you can make them small or large, long or short.
I made a 6 inch to test and it works very well.
All you need is the expanded metal roll material from Home Depot or Lowe's, don't get the aluminum, get the steel 6 inch roll.
Just cut some off and roll it up and crimp the ends or stuff foil in there to close one end.
You will need a pair of tin snips or something that will cut the expanded metal. Watch your hands, the ends are sharp.
Here is a couple pics of one that I made. The one in the bottom of the bucket is a 9 inch Amazen Tube.
The one I made is 6 inches and smoked for about 2 hours.
And you can make them small or large, long or short.
I made a 6 inch to test and it works very well.
All you need is the expanded metal roll material from Home Depot or Lowe's, don't get the aluminum, get the steel 6 inch roll.
Just cut some off and roll it up and crimp the ends or stuff foil in there to close one end.
You will need a pair of tin snips or something that will cut the expanded metal. Watch your hands, the ends are sharp.
Here is a couple pics of one that I made. The one in the bottom of the bucket is a 9 inch Amazen Tube.
The one I made is 6 inches and smoked for about 2 hours.