Blowing fuses in Lockhart

Brt83

New member
Joined
Jun 30, 2020
Messages
2
Reaction score
0
Location
Indiana
Last night while using my Lockhart blew a fuse. I replaced the fuse today and as soon as I plugged it in it blew right away again. When it blew it appeared to have shot sparks where temp probe and light wires go into back of the cooking chamber. Anyone have any idea what might be wrong or had similar problems?
20210519_185028.jpg
 

HuntJ08

Member
Joined
Jul 4, 2020
Messages
71
Reaction score
27
Location
Covington GA
Haven't seen or heard of this on Lockhart.

Contact PB Cust Service. They will throw parts at you (if not B/O'd) !

Will be following.....
 

Brt83

New member
Joined
Jun 30, 2020
Messages
2
Reaction score
0
Location
Indiana
Haven't seen or heard of this on Lockhart.

Contact PB Cust Service. They will throw parts at you (if not B/O'd) !

Will be following.....
Thank you for info! After I posted the thread I went back out and tore into it further and possibly have figured out my problem. The wire for the light in the cooking chamber was pinched in between 2 pieces of metal. I believe that is the problem.
 

Latest Discussions

Top