Pitboss KC Combo ERL error

[PitBoss_Guest]

I've had a pit boss kc combo. I've only had it for 5 1/2 months. When I tried to use it this weekend I'm getting an ERL error code. I read online and it says to unplug it wait and plug it back in and restart. Everything I do this I still ge the error code. What can I do?

 

[hollrusl]

Call customer service and see what they say.

 

[Cowboy1955]

Clean the temperature sensor
It stops temperature swings
Hopefully this helps you

 

[Freedbyjc]

I've had a pit boss kc combo. I've only had it for 5 1/2 months. When I tried to use it this weekend I'm getting an ERL error code. I read online and it says to unplug it wait and plug it back in and restart. Everything I do this I still ge the error code. What can I do?

If your ambient temperatures are very low and your smoker does not want to start (ERL/ERR) ... you can use a hair dryer, Heat gun, brûlée torch or any heat source on the RTD or digital thermometer probe on the inside of barrel on left side. Heat it up so the controller shows temperatures above freezing; that will allow the grill to start and go through normal start up. Once it is going and it heats up it will run normally.



Sometimes, when it comes to ambient temperatures and a PitBoss , you just have to play the cards you’ve been dealt.



An Insulated blanket or non-fiberglass welding blankets or FIRE BRICKS lining the bottom of the barrel will store the heat the firepot produces; It lessens the heat loss from the barrel; will help to stabilize your barrel temperatures and also minimize pellet usage.