Need help!!!!

Hamilton184215

New member
Joined
Jun 14, 2020
Messages
2
Reaction score
0
Location
Me184215!
Good morning everyone,
I was gifted an 820XL because it had a siezed auger and the owner didnt want to fix it. I cleared the jam and put it all back together. My problem is, i am having issues where the motor wont feed and gets "stuck" in place in a "deadzone". Is there supposed to b a gap between the motor and the burn box platform under the motor? Is the motor supposed to "slap" around back and forth? Please help!!!! I have things to smoke!!!!!
 
Good morning everyone,
I was gifted an 820XL because it had a siezed auger and the owner didnt want to fix it. I cleared the jam and put it all back together. My problem is, i am having issues where the motor wont feed and gets "stuck" in place in a "deadzone". Is there supposed to b a gap between the motor and the burn box platform under the motor? Is the motor supposed to "slap" around back and forth? Please help!!!! I have things to smoke!!!!!


Yes, the motor is not fixed it supposed to flap around, but view this video from Pit Boss.

 
Thanks. I used that video to take it apart and clear the jam when i got it. Afyer doingsome web searching i think the gears in the motor might have some busted teeth leading to my dead zone issue.
 
you can get a cheaper auger motor on Ebay or just go to Pit Boss to order a replacement.
 

Latest Discussions

Back
Top