Keep getting number 5 on temp select screen

dagodago1

New member
Joined
Oct 24, 2021
Messages
3
Reaction score
0
Location
UT
Not sure what it is but every time I push temp select dial in to select it keeps coming up with the number 5 flashing. I have to push it in many times to get a temp to select, 200* 225* 185* etc and even then it quickly reverts back to the flashing number 5...
 

dagodago1

New member
Joined
Oct 24, 2021
Messages
3
Reaction score
0
Location
UT
thank you for the reply.. Sometimes it's hard to get it to show temperature for setting because when I push the temp controller switch in, it causes that "S" appears almost all the time and wont stop flashing... Thank you again...
 

dagodago1

New member
Joined
Oct 24, 2021
Messages
3
Reaction score
0
Location
UT
Thats what I do but its almost impossible to get the flashing S to switch to thermo select temps and then sometimes it will switch back to the S and same go around.. It never did it at the start and just is a real PITA....
 
Top